Click here to return to Home page
Installing and Routing Cables
Smooth Run The run of the flexible drive must be smooth. The minimum bend radius is 6” with no bend within 2” of connections.
Connection of inner flex Where possible, slightly withdraw the inner flex and connect outer casing first to point of drive. Then slide inner flex into engagement from the other end. It may be necessary to rotate the flex.
Lubrication of Replacement Inners Apply grease sparingly to replacement flex. Feed flex back into its casing then withdraw approximately 8” and wipe off surplus grease. Use SHELL SB2628 Grease. Do not use oil.
Terms & Conditions